
This document provides an exhaustive overview of the ZF6S1000 3rd/4th gear transmission shift fork, an essential component for maintaining the operational integrity of specific commercial vehicle gearboxes. Identified by its OEM (Original Equipment Manufacturer) part number 0501 217 828, this shift fork plays a pivotal role in the manual gear selection process, facilitating the engagement of the third and fourth gears within heavy-duty ZF transmissions.
1. Introduction to the Component
The shift fork is a fundamental part of a manual or automated manual transmission system. Its primary function is to physically move a sliding sleeve or synchronizer assembly along the main shaft, which in turn locks a specific gear to the shaft, thereby transmitting power.
The ZF6S1000 is part of ZF's robust family of six-speed manual and automated manual (AS Tronic Lite) transmissions, widely used in medium-to-heavy commercial vehicles, including certain Volvo and Dongfeng truck models. The 0501 217 828 shift fork is specifically engineered for the precise requirements of the 3rd and 4th gear selection, an area subject to significant mechanical stress during gear changes.
Key Part Identifiers
OEM Part Number (ZF): 0501 217 828
Interchangeable/Cross-Reference Numbers: 21624864 (Volvo), 0501222820
Position: 3rd/4th Gear Selector Fork
Condition: Typically sold as new
Type: Gearbox Component
2. Technical Specifications and Design
Dimensional accuracy and material composition are critical for shift forks, as minor deviations can lead to incomplete gear engagement, gear clash, and premature failure of the entire transmission system.
Material Composition
While specific proprietary alloys are used by manufacturers, shift forks for commercial vehicle applications are typically manufactured from robust metals, such as high-strength aluminum or cast iron, selected for their wear resistance and structural integrity under high load and temperature conditions. The manufacturing process often involves a rigorous multi-step forging and heat treatment process to ensure optimal mechanical properties.
Design and Dimensions
The unique U-shaped design of the fork is tailored to interface directly with the synchronizer sleeve.
Typical Dimensions (Approximate): 30 cm x 25 cm x 4 cm (11.81 in x 9.84 in x 1.57 in), though these can vary slightly between manufacturers.
Weight (Approximate): Around 2.0 kg, or approximately 0.947 kg for some variants.
Operating Environment: Designed to function within an oil bath environment, operating at high temperatures (up to 150 °C).
Manufacturing Process Insights
The production of a high-quality shift fork involves sophisticated engineering, including die forging, multiple stages of heating, trimming, shot blasting, and rigorous testing, including magnetic powder testing, to ensure structural integrity and prevent rust. This complex process is necessary to produce a component capable of withstanding constant friction and mechanical shock inherent in commercial vehicle operation.
3. Features and Benefits
The primary advantage of using a genuine or high-quality aftermarket OEM replacement part like the 0501 217 828 is the assurance of compatibility and durability that aligns with ZF's original engineering standards.
Key Features
OEM Specification Match: Engineered to meet or exceed original ZF specifications for fit, form, and function.
Durable Construction: Built to withstand the harsh conditions inside a heavy-duty transmission, offering high resistance to wear and tear.
Precise Fitment: The exact dimensions ensure smooth interaction with the 3rd and 4th gear synchronizer assembly, preventing common issues like gear clash.
Corrosion Resistance: Often treated with rust-proof coatings following manufacturing.
Primary Benefits
Restored Performance: Replacing a worn fork helps eliminate gear slip, hard shifting, or the inability to select 3rd or 4th gear, restoring the vehicle's optimal performance and efficiency.
Extended Transmission Life: Proper functioning of all internal components reduces overall stress and friction, preventing cascading failures in other expensive parts like gears and shafts.
Reliability: Guarantees that the repair is reliable and long-lasting, a crucial factor for commercial vehicles where uptime is critical.
Safety: Ensures predictable and smooth gear changes, contributing to overall vehicle safety.
4. Applications and Compatibility
The 0501 217 828 shift fork is used across a specific range of ZF gearboxes.
Compatible Gearbox Models
This fork is compatible with several versions of the ZF 6S1000 manual transmission, as well as the related automated manual (AS Tronic Lite) variants:
ZF 6S1000
ZF New Ecomid series
ZF Ecolite series
ZF AS Tronic Lite series
Specific versions such as ZTO1006, ATO1056, 6AS1000, and 6S1010
Compatible Vehicle Applications
This transmission and fork are commonly found in medium-to-heavy commercial trucks from manufacturers such as:
Volvo (FL, FE series)
Renault Trucks
Dongfeng (and other Chinese market trucks)
5. Maintenance and Failure Prevention
Shift fork failures are often a result of systematic issues within the transmission rather than isolated component failure.
Common Causes of Shift Fork Wear
Fluid Contamination: Dirty or degraded transmission fluid is a leading killer of internal components. Contaminated fluid loses its lubrication properties, increasing friction and accelerating wear on the shift fork pads and synchronizer rings.
Overheating: Excessive heat breaks down the fluid faster and can compromise the integrity of the metal components over time.
Improper Operation: "Riding the clutch" or forcing gear engagement can put undue stress on the fork and synchronizer assembly.
Lack of Maintenance: Neglecting regular fluid and filter changes allows debris to accumulate, turning the transmission fluid into an abrasive slurry.
Preventive Measures
Regular maintenance is paramount to the longevity of the ZF6S1000 transmission. Adhering to manufacturer-recommended service intervals for fluid changes and using the correct type of ZF-approved lubricant can significantly mitigate wear. Regular inspections during transmission servicing can identify early signs of wear on the shift fork, allowing for timely replacement before a catastrophic failure occurs.
6. Conclusion
The ZF6S1000 3rd/4th gear transmission shift fork 0501 217 828 is a critical, highly engineered component that ensures the reliable and smooth operation of commercial vehicles equipped with compatible ZF gearboxes. Its robust design and precise manufacturing specifications make it an essential replacement part for maintaining vehicle efficiency and safety.
Fast Gearbox Assembly F16JZ28 16JZ260 16JSD180T 16JSD200T 16JSD240T C16JSDQXL250TA C12JSDQXL260TA C16JZSDQXL220 C16JSDQXL250TA C12JSDQXL260TA C16JZSDQXL220 F16JZ28 16JZ260 16JSD180T 16JSD200T 16JSD240T FC6A210 FC6A250 FC6A140 FC6A180 FC8A120 IVECO DAF MAN RENAULT ZF ASTRA FOTON Kamaz Hyundai Hino DONGFENG





Generally, in-stock items can be shipped within fifteen days, while some that require preparation time can be inquired about in detail.
Our product quality is very good, all are original factory parts.
We will guarantee that your product has a three-month shelf life, and we can discuss the details.
one